lemon-mirror:
Home >> Toyota >> 2005 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition System >> Camshaft Position Sensor >> Installation

Camshaft Position Sensor: Installation

  1. INSTALL CAMSHAFT POSITION SENSOR 

    Install the camshaft position sensor with the bolt and stud bolt

    1. Torque: 7.5 N.m (80 kgf.cm, 66 in.lbf) 
    Fig 1: Installing Camshaft Position Sensor
    G02650771Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LH NO. 3 TIMING BELT COVER (See  INSTALLATION  ) 
  3. INSTALL DRIVE BELT (See  INSTALLATION  ) 
  4. FILL ENGINE COOLANT (See REPLACEMENT  ) 
  5. CHECK ENGINE COOLANT FOR LEAKS 
  6. CHECK IGNITION TIMING (See  IGNITION TIMING  ) 
· About lemon-mirror