lemon-mirror:
Home >> Toyota >> 2005 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition System >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. DRAIN ENGINE COOLANT 
  2. REMOVE DRIVE BELT (See  REMOVAL  ) 
  3. REMOVE LH NO. 3 TIMING BELT COVER (See  REMOVAL  ) 
  4. REMOVE CAMSHAFT POSITION SENSOR 

    Remove the bolt, stud bolt and camshaft position sensor.

    Fig 1: Removing Camshaft Position Sensor
    G02650770Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror