lemon-mirror:
Home >> Toyota >> 2005 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition System >> Crankshaft Position Sensor >> Installation

Crankshaft Position Sensor: Installation

  1. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Install the crankshaft position sensor with the bolt.

      Torque: 6.5 N.m (65 kgf.cm, 58 in.lbf) 

    2. Connect the crankshaft position sensor connector.
    Fig 1: Installing Crankshaft Position Sensor
    G02650775Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ENGINE UNDER COVER 
· About lemon-mirror