lemon-mirror:
Home >> Toyota >> 2007 >> FJ Cruiser RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> VVT Sensor >> Removal

VVT Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. DRAIN ENGINE COOLANT  (See REPLACEMENT )
  3. REMOVE V-BANK COVER  (See REMOVAL  )
  4. REMOVE AIR CLEANER ASSEMBLY  (See REMOVAL  )
  5. REMOVE VVT SENSOR 
    1. Bank 1 side VVT sensor:
      1. Disconnect the VVT sensor connector.
      2. Remove the bolt and VVT sensor.
        Fig 1: Identifying VVT Sensor Bolt (Bank 1 Side)
        G05108959Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Bank 2 side VVT sensor:
      1. Disconnect the No. 4 water bypass hose and No. 5 water bypass hose.
      2. Disconnect the VVT sensor connector.
        Fig 2: Identifying VVT Sensor Connector
        G05108960Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      3. Remove the bolt and VVT sensor.
        Fig 3: Identifying VVT Sensor Bolt (Bank 2 Side)
        G05108961Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror