lemon-mirror:
Home >> Toyota >> 2009 >> Matrix Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2ZR-FE) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. REMOVE ENGINE UNDER COVER RH 
  2. REMOVE CRANK POSITION SENSOR 
    1. Disconnect the crank position sensor connector.
    2. Remove the bolt and crank position sensor.
      Fig 1: Locating Bolt And Crank Position Sensor
      G05398770Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror