| 4WD, w/Single Piece Driveline | Includes: Confirm Fluid temperature for level check. | 10.2 | | C |
| 4WD, w/Two Piece Driveline | Includes: Confirm Fluid temperature for level check. | 10.4 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: OIL PUMP: Remove & Replace: |
| | 0.6 | | B |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul: |
| 4WD | Includes: R&I Transfer Case Assembly. | 5.0 | | A |
| Combination Procedure: TRANSFER CASE ASSEMBLY: Removal & Installation: |
| 4WD | | 0.5 | | C |
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: |
| 4WD | Includes: R&I Transfer Case Assembly. | 0.8 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| 4WD | Includes: Initialization.
Includes: R&I Transfer Case Assembly. | 1.1 | | C |
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: |
| | 0.5 | | C |