lemon-mirror:
Home >> Volkswagen >> 2000 >> EuroVan Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Fuel System >> Fuel Pump Amperage Draw >> 2.8L VR6

2.8L VR6

  1. Access fuel pump through access cover under driver's seat. Ensure all fuel lines are connected.
  2. Connect DVOM Red/Yellow wire on fuel pump connector using current measuring adapter.
  3. Start engine and let it idle. Maximum amperage draw should be 8 amps.
  4. If amperage draw is too high, replace fuel pump.
· About lemon-mirror