Side Object Detection Module: Remove & Replace
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Both Sides,J1086/J1087 | DOES NOT include Calibration. | 0.8 | B | |
| One Side,J1086/J1087 | DOES NOT include Calibration. | 0.5 | B | |
| Combination Procedure: SIDE OBJECT DETECTION MODULE: Calibrate: | ||||
| The blind spot detection calibration normally occurs automatically.Static calibration is only required when there is a DTC memory entry. Static calibration is only required when there is a DTC memory entry. Includes: Additional time for use of scan tool to perform this procedure. | 1.0 | B | ||