lemon-mirror:
Home >> Acura >> 1990 >> Integra LS, 2D Hatchback, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Testing >> Notes

Diagnosis & Testing: Testing: Notes

  1. Turn ignition off. Connect ABS Tester (07HAJ-SG00100) to 6-pin test connector, located under front passenger seat. Start engine. Release parking brake. Place mode selector to "1". Push start test button. See Fig 1 . Test-in-progress light should come on. Within 1-2 seconds, 4 monitor lights should come on. If tester lights do not illuminate, ABS tester is faulty.
    Fig 1: View of ABS Tester (07HAJ-SG00100)
    G58126Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. If ANTI-LOCK light comes on, ABS tester harness is faulty. Turn mode selector to "2". Depress brake pedal. Push start test button. ANTI-LOCK warning light should not come on and kickback should be felt in brake pedal.
  3. If light comes on or kickback is not felt, see ANTI-LOCK WARNING LIGHT STAYS ON  in this article. Place mode selector in "3", "4", "5" then "6". Repeat step 2) for each test mode. Results should be the same as in test mode "2". If not, see ANTI-LOCK WARNING LIGHT STAYS ON  in this article. Breakdown of testing of each mode is as follows:
· About lemon-mirror