lemon-mirror:
Home >> Acura >> 1990 >> Legend Base, 2D Coupe, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Timing Control System >> Ignition Timing Adjuster

Ignition Timing Adjuster

Turn ignition off. Disconnect ignition timing adjuster 3-wire connector located on right side of firewall. Measure resistance between Yellow/White wire and Green/White wire terminals on ignition timing adjuster harness. Resistance should be 3000-6000 ohms. Replace ignition timing adjuster if resistance is not as specified.

· About lemon-mirror