lemon-mirror:
Home >> Acura >> 1993 >> Integra GS-R >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Solenoid >> Installation

Removal & Installation: Solenoid: Installation

  1. Fill modulator body with clean brake fluid up to step in solenoid mounting hole. Coat new solenoid "O" rings with clean brake fluid, and install "O" rings on solenoid. Apply thin film of clean brake fluid to solenoid body and "O" rings. Position solenoid on set plate.
  2. Ensure mark on set plate matches mark on solenoid. Align solenoid projection with cutout in set plate and turn valves 1/2 turn. Install solenoid adjust springs in modulator body. Install set plate bolt removed in step 3) of REMOVAL procedure. Tighten all set plate bolts to 11 ft. lbs. (15 N.m). Install reservoir and filter.
· About lemon-mirror