Dash Light Dimmer Control
- Turn ignition off. Remove instrument panel cover from dash. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Disconnect wiring from dash light dimmer control unit. Ensure Black wire has continuity to ground. See Fig 1
. If continuity does not exist, repair open in wire.
- Turn headlight switch on. Check Red/Black wire for battery voltage. See Fig 1
. If battery voltage is present, go to next step. If battery voltage is not present, check fuse No. 19, combination light switch or Red/Black wire for open. Repair as necessary.
- Ground Red wire. Dash lights should come on full bright. If lights are bright, circuits are okay. If dash lights still do not work correctly, replace dash light dimmer control unit. If lights do not go full bright, check dash bulbs condition and Red wire for open. Repair as necessary.
Courtesy of AMERICAN HONDA MOTOR CO., INC.