lemon-mirror:
Home >> Acura >> 1995 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Integrated Control Unit >> Component Tests >> Ignition Key Switch

Ignition Key Switch

  1. Remove the dashboard lower panel and left knee bolster, then disconnect the 7-P connector from the main wire harness. See Fig 1 .
  2. Check for continuity between terminals No. 2 and 4 with key in each condition. See Fig 2 . Replace ignition key switch if continuity is not as specified.
Fig 1: Locating & Identifying Ignition Key Switch 7-P Connector
G00147244Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 2: Testing Ignition Key Switch Continuity
G00147250Courtesy of AMERICAN HONDA MOTOR CO., INC.
· About lemon-mirror