lemon-mirror:
Home >> Acura >> 1997 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Cranking Test

Cranking Test

  1. Connect a voltmeter and ammeter to battery. See Fig 1 . Disconnect 2-pin connector from distributor.
  2. Use remote starter switch to crank engine. Check cranking voltage and current draw. Ensure voltage is at least 8 volts. Current draw should be less than 350 amps. Cranking speed should be greater than 100 RPM.
Fig 1: Connecting Voltmeter & Ammeter For Cranking Test
G96G06241Courtesy of AMERICAN HONDA MOTOR CO., INC.
· About lemon-mirror