lemon-mirror:
Home >> Acura >> 1998 >> 3.5RL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Body Computer Systems) >> Component Tests >> Ignition Key Switch Test >> Integra

Ignition Key Switch Test: Integra

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1998 Acura Integra, 1998 Acura 3.2TL, 1998 Acura 3.0CL, 1998 Acura 2.5TL, and 1998 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.

Remove dashboard lower cover and knee bolster. Disconnect main harness 7-pin connector. Use DVOM and check for continuity between main harness 7-pin connector terminals No. 2 and 4. See Figure . Continuity should be indicated with key in ignition switch. Continuity should not be indicated with key out of ignition switch. If continuity is not as indicated, replace ignition switch. See IGNITION SWITCH  under REMOVAL & INSTALLATION.

· About lemon-mirror