Fluid Level: Checking/Changing: Changing

Bring the transmission up to operating temperature by driving the vehicle. Park the vehicle on level ground, turn the engine off, then remove the drain plug.
NOTE: If a cooler flusher is to be used, COOLER FLUSHING .
Reinstall the drain plug with a new sealing washer, then refill the transmission with the recommended fluid* to the upper mark on the dipstick.
Automatic Transmission Fluid Capacity:

2.7 l (2.9 US qt, 2.4 Imp qt) at change

5.9 l (6.2 US qt 5.2 Imp qt) at overhaul

Recommended Automatic Transmission Fluid:

Genuine Honda Premium Formula Automatic

Transmission Fluid (ATF)*

Fig 1: Identifying Drain Plug And Sealing Washer
Courtesy of AMERICAN HONDA MOTOR CO., INC.

* Always use Genuine Honda Premium Formula Automatic Transmission Fluid (ATF). Using a non-Honda ATF can affect shift quality.