lemon-mirror:
Home >> Acura >> 2000 >> 3.2TL >> Repair and Diagnosis >> Body & Frame >> Seats >> Driver Position Memory System >> Driving Position Memory System (DPMS) >> Driver's Power Seat Motor Test

Driver's Power Seat Motor Test

  1. Remove the driver's seat. See FRONT SEATS .
  2. Disconnect the connector from each power seat connector.
    Fig 1: Identifying Driver's Power Seat Motor Connector Terminals
    G01157068Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Test the motor by connecting power and ground according to the table. When the motor stops running, disconnect battery power immediately.
    Fig 2: Slide/Recline Motor Test
    G01157069Courtesy of AMERICAN HONDA MOTOR CO., INC.
    Fig 3: Front Up/Down Motor Test
    G01157070Courtesy of AMERICAN HONDA MOTOR CO., INC.
    Fig 4: Rear Up/Down Motor Test
    G01157071Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the motor does not run or fails to run smoothly, replace it (see POWER HEATED SEATS ).
· About lemon-mirror