lemon-mirror:
Home >> Acura >> 2001 >> 3.2CL Base >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panels >> Component Tests >> Cruise Control Main Switch

Cruise Control Main Switch

  1. Remove Traction Control System (TCS) and cruise control main switch from driver's switch panel. Disconnect main switch 8-pin connector. With switch in OFF position, continuity should exist between terminals No. 1 and 2, and between terminals No. 4 and 7. See Fig 1 . Go to next step.
  2. With main switch in ON position, continuity should exist between switch terminals No. 1 and 2, and between terminals No. 4, 5 and 7. See WIRING DIAGRAMS  . If continuity is not as specified, replace TCS/cruise control main switch.
Fig 1: Identifying Traction/Cruise Control System Main Switch Harness Connector Terminals
G99B05164Courtesy of AMERICAN HONDA MOTOR CO., INC.
· About lemon-mirror