ATF Level Check

NOTE: Keep all foreign particles out of the transmission.

Warm up the engine to normal operating temperature (the radiator fan comes on).
Park the vehicle on the level ground. Turn off the engine.
Remove the dipstick (yellow loop) (A) from the transmission, and wipe it with a clean cloth.

Fig 1: Locating Dipstick
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Insert the dipstick into the transmission.
Remove the dipstick and check the fluid level. It should be between the upper mark (B) and lower mark (C).

Fig 2: Checking Fluid Level
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the level is below the lower mark, pour the recommended fluid into the filler hole (A) to bring it to the upper mark. Always use Honda ATF-Z1 Automatic Transmission Fluid (ATF). Using a non-Honda ATF can affect shift quality.

Fig 3: Installing ATF Filler Bolt
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the ATF filler bolt (B) with a new sealing washer (C).
Insert the dipstick back into the transmission.