Ignition Switch
Disconnect negative battery cable. Remove lower instrument panel cover and driver-side knee bolster. Disconnect 7-pin connector from steering column harness. With ignition switch in appropriate position, check continuity between specified connector terminals. See Fig 1 . See IGNITION SWITCH CONTINUITY table. If continuity is not as specified, replace ignition switch.
IGNITION SWITCH CONTINUITY
| Ignition Switch Position | Check for Continuity Between Terminals No. |
|---|---|
| LOCK | No Continuity |
| ACC | 1 & 6 |
| ON | 1, 3, 6 & 7 |
| START | 1, 3 & 4 |