lemon-mirror:
Home >> Acura >> 2003 >> 1.7EL Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless/Power Door Lock System >> Keyless Receiver Unit Input Test

Keyless Receiver Unit Input Test

  1. Remove the dashboard center lower cover (see DASHBOARD CENTER LOWER COVER REMOVAL/INSTALLATION ).
  2. Remove the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).
  3. Disconnect the 5P connector (A) from the keyless receiver unit (B).
    Fig 1: Disconnecting 5P Connector From Keyless Receiver Unit
    G01960802
  4. Inspect the connector and socket terminals to be sure they are all making good contact.
    • If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
    • If the terminals are OK, go to step 5.
  5. With the connector still disconnected, make these input tests at the connector.
    • If any test indicates a problem, find and correct the cause, then recheck the system.
    • If all the input tests prove OK, replace the keyless receiver unit.
    Fig 2: Keyless Receiver Unit Input Test (Connectors Disconnected)
    G01960803
· About lemon-mirror