Keyless Buzzer Test/Replacement

Remove the right inner fender (see FRONT INNER FENDER REPLACEMENT ).
Disconnect the 2P connector (A) from the keyless buzzer (B).

Fig 1: Disconnecting 2P Connector From Keyless Buzzer
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the buzzer by connecting battery power to the No. 2 terminal and grounding the No. 1 terminal. You should hear a slight chirp.
If the buzzer fails to sound, remove the two mounting screws, and replace the buzzer.

Fig 2: Removing Buzzer Mounting Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.