lemon-mirror:
Home >> Acura >> 2003 >> MDX Base >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Power Mirrors >> Function Test >> Left Mirror

Left Mirror

  1. Connect the No. 1 terminal to the No. 7 terminal, and the No. 4 (or No. 9) terminal to body ground with jumper wires. The left mirror should tilt down (or swing left) with the ignition switch ON (II).
    • If the mirror does not tilt down (or does not swing left), check for an open in the BLU/WHT (or BLU/ ORN) wire between the left mirror and the 10P connector. If the wire is OK, check the left mirror actuator.
    • If the mirror neither tilts down nor swings left, check for an open in the BLU/GRN wire.
    • If the mirror works properly, check the mirror switch.
· About lemon-mirror