Key Interlock Solenoid Test
- Remove the driver's dashboard lower cover.
- Remove the lower steering column cover.
- Disconnect the steering lock assembly connector (6P). Insert the ignition key in the key cylinder, then turn the ignition key to ACC (I).
- Connect the steering lock assembly connector (6P) terminal No. 4 to the battery positive terminal, and connect the battery negative terminal to terminal No. 3. Try to turn the ignition key to LOCK (0) and then remove from the key cylinder.
- If the ignition key cannot be turned and removed from the cylinder, replace the ignition key cylinder/steering lock assembly.
Courtesy of AMERICAN HONDA MOTOR CO., INC.