Shift Lever Installation

Install the shift lever assembly.

Fig 1: Installing Shift Lever Assembly And Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Connect transmission gear selection switch/park pin switch connector (A) and shift lock solenoid connector (B), and install the harness clamps (C) on the shift lever bracket base.
Turn the ignition switch ON (II), and verify that the N position indicator comes on.

Fig 2: Identifying Indicator Light
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the shift cable to the shift lever (see step 5 ). If necessary, adjust the shift cable.