Park Pin Switch Test
- Remove the center console cover (see
CENTER CONSOLE REMOVAL/INSTALLATION
).
- Disconnect the transmission gear selection switch/ park pin switch connector.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Shift the shift lever to P, then check for continuity between transmission gear selection switch/park pin switch connector terminals No. 1 and No. 4. There should be no continuity.
- Shift the shift lever out of P, and check for continuity between transmission gear selection switch/park pin switch connector terminals No. 1 and No. 4. There should be continuity.
- If the park pin switch is faulty, replace it.