Resetting The Maintenance-Information Display

NOTE: If the required service is performed and the display is not reset, or if the display is reset without performing the service, the system will not show the proper maintenance levels. This can lead to serious mechanical problems because there will be no record of when maintenance is needed.

Turn the ignition switch to ON (II).
Push and release the SEL/RESET button on the steering wheel repeatedly until the oil life is displayed (if more than 15 percent) or the maintenance message is displayed (if oil life is less than 15 percent).
NOTE: If you are resetting the display when the oil life is more than 15 percent, the maintenance message "SERVICE DUE SOON" will be displayed. Make sure the maintenance items requiring service have been performed before resetting this display.
Push and hold the SEL/RESET button for 10 seconds. The display will change to the "OIL LIFE RESET" mode.
- To reset the engine oil life, press the info button to select RESET on the display, then press the SEL/RESET button. The maintenance item code(s) will disappear, and the engine oil life indicator will reset to "100".
- To cancel resetting the engine oil life, press the info button to select CANCEL on the display, and press the SEL/RESET button.
- If the engine oil life and maintenance code do not complete the reset procedure within 30 seconds after selecting the "OIL LIFE RESET" mode, the mode will be canceled automatically.
  
  Fig 1: Identifying OIL LIFE RESET Display
  Courtesy of AMERICAN HONDA MOTOR CO., INC.