lemon-mirror:
Home >> Acura >> 2007 >> MDX >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> Knock Sensor Replacement

Knock Sensor Replacement

  1. Remove the intake manifold (see REMOVAL ).
  2. Remove the injector rails and the injector base (see INJECTOR BASE REMOVAL AND INSTALLATION ).
  3. Disconnect the knock sensor 1P connector (A), then remove the knock sensor (B).
    Fig 1: Knock Sensor 1P Connector With Torque Specification
    G05485134Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the parts in the reverse order of removal.
· About lemon-mirror