lemon-mirror:
Home >> Acura >> 2007 >> RDX >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Supply System >> Fuel Fill Pipe Removal/Installation

Fuel Fill Pipe Removal/Installation

  1. Drain the fuel tank (see FUEL TANK DRAINING ).
  2. Remove the fuel fill cap.
  3. Disconnect the fuel fill tube (A) from the fuel tank. Slide back the clamp, then twist the tube as you pull to avoid damaging it.
    Fig 1: Identifying Fuel Fill Tube
    G05444775Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the fuel fill pipe cover (A).
    Fig 2: Fuel Fill Pipe Cover With Torque Specifications
    G05444776Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Disconnect the quick-connect fitting (B).
  6. Remove the bolts (A), then remove the fuel fill pipe (B) and fuel fill tube (C).
    Fig 3: Fuel Fill Pipe, Fuel Fill Tube With Torque Specifications
    G05444777Courtesy of AMERICAN HONDA MOTOR CO., INC.
  7. Install the parts in the reverse order of removal.
· About lemon-mirror