Drive Belt Replacement

Special Tools Required 

Belt tension release tool Snap-on YA9317 or equivalent, commercially available

1. Remove the right side engine compartment cover.
   Fig 1: Identifying Right Side Engine Compartment Cover

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Move the auto-tensioner (A) using the belt tension release tool (B) to relieve tension from the drive belt (C), then remove the drive belt.
   Fig 2: Moving Auto-Tensioner

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install the new belt in the reverse order of removal.
   NOTE: For belt routing, see COMPONENT LOCATION INDEX & DRIVE BELT ROUTING .