Without Navigation
NOTE:
Vehicles with navigation; refer to audio-HVAC subdisplay unit removal/installation (see
AUDIO UNIT REMOVAL/INSTALLATION
).
- Remove the dashboard center vent (see DRIVER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION ).
- Disconnect the 5P connector (A) from the clock.
- Remove the two mounting screws, and remove the clock (B).
Terminals
TESTING CONDITION CHARTCavity Wire Connect to 1 WHT/RED Constant power 2 YEL IG1 (Main clock power supply) 3 - Not used 4 BLK Ground (G503, G601) 5 RED/BLU Lights-on signal (-) - Install in the reverse order of removal.