lemon-mirror:
Home >> Acura >> 2007 >> TL Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Park Pin Switch Replacement

Park Pin Switch Replacement

  1. Remove the center console (see CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION ).
  2. Disconnect the transmission gear selection switch/ park pin switch/A/T gear position indicator panel light connector (A), then remove the connector from the shift lever bracket base.
    Fig 1: Identifying A/T Gear Position Indicator Panel Light Connector, Panel Light Bulb Socket And Bulb
    G05459164Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the A/T gear position indicator panel light bulb socket (B), then remove the bulb (C) from the socket.
  4. Remove the transmission gear selection switch/ park pin switch (D) by releasing the lock tabs (E).
  5. Install a new switch assembly in the shift lever bracket base.
  6. Install the bulb in the socket, then install the socket in the bracket base.
  7. Install the switch connector on the bracket base, then connect the connector.
  8. Install the center console (see CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION ).
· About lemon-mirror