lemon-mirror:
Home >> Acura >> 2008 >> TL Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless/Power Door Locks/Security System >> Security Indicator Test

Security Indicator Test

  1. Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 2P connector from the security indicator.
    Fig 1: Identifying Security Indicator 2P Connector
    G05462647Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. The LED should come on when battery power is connected to terminal No. 2, and ground is connected to terminal No. 1.
  4. If the LED does not work as specified, replace the security indicator.
· About lemon-mirror