VSA Off Switch Test/Replacement

Remove the instrument fascia (see INSTRUMENT FASCIA REMOVAL/INSTALLATION ).
Disconnect the multi switch 6P connector (A).

Fig 1: Disconnecting Multi Switch 6P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
On the switch side, check for continuity between the multi switch 6P connector terminals No. 4 and No. 6. There should be continuity when the button is pressed, and no continuity when the button is released.

Fig 2: Checking Continuity Between Multi Switch 6P Connector Terminals No. 4 And No. 6
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, replace the multi switch (with built-in VSA OFF switch) (A) from the instrument fascia (B).

Fig 3: Identifying VSA OFF Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the multi switch (with built-in VSA OFF switch) in the reverse order of removal.