lemon-mirror:
Home >> Acura >> 2012 >> TL Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer-Keyless Control Unit Replacement

Immobilizer-Keyless Control Unit Replacement

NOTE: SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or servicing.
  1. Remove the steering column covers (see SIDE DEFOGGER VENT TRIM REMOVAL/INSTALLATION ).
  2. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B).
    Fig 1: Identifying Immobolizer-Keyless Control Unit
    G08067519Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the two screws and the immobilizer-keyless control unit.
  4. Install the immobilizer-keyless control unit in the reverse order of removal.
  5. After replacement, register the immobilizer-keyless control unit (see IMMOBILIZER KEY REGISTRATION  ), and make sure the immobilizer system works properly.
  6. Program all of the client's keys/keyless transmitters (see ADD AND DELETE KEYS/KEYLESS TRANSMITTERS, THEN SELECT DELETE OR ADD KEYS  ).
· About lemon-mirror