Interior monitoring, checking function
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
The function of the ultra-sonic interior monitoring is checked as follows:
- Open side window approx. 10 cm (4 in.).
- Lock vehicle to set alarm and activate interior monitoring.
- Wait 30 seconds until indicator light blinks with steady frequency (f = 0.5 Hz, or once every two seconds).
- Reach through window opening and place hand directly on sensor cover.
If interior monitoring is OK, the alarm will be triggered.
- Unlock vehicle to switch alarm off.
- Perform testing on all sensors in sequence.
- Erase DTC memory.