Auto Headlight Beam Leveler System: Procedure: Initialization
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Confirm that the indicator in the meter is repeatedly flashing twice.
- Bounce the vehicle several times to normalize the suspension.
- Make certain that someone is seated in the driver's seat.
- Turn the ignition ON, and within a period over 1.5 seconds and under 20 seconds, repeat headlight switch OFF ==> ON 3 times or more.
- Confirm that the indicator in the meter flashes 3 times and turns OFF, completing the initialization. (At this time, the headlight beam adjustment is lowered, and then returns to the original position.)
- Perform beam adjustment for the headlight. < Ref. to ADJUSTMENT , Headlight Assembly. >