Fuel Level Sensor -G- CONNECTOR ASSIGNMENT

-- Disconnect the 5-pin connector from the fuel tank connection flange. For the procedure. Refer to Fuel Level Sensor -G-, REMOVING AND INSTALLING .

Assignment of the 5-pin connector at Fuel Level Sensor -G-.

Courtesy of AUDI OF AMERICA, LLC

Transfer Fuel Pump -G6- switched positive
Wire connection from Fuel Level Sensor -G- to instrument cluster (sensor ground) - Pin 5
Wire connection from Fuel Level Sensor -G- to instrument cluster (fuel gauge) - Pin 7
Wire connection from Fuel Level Sensor -G- to instrument cluster (fuel gauge) - Pin 6
Transfer Fuel Pump -G- ground

NOTE:

For vehicles with a FSI- and TFSI engine, the pins -2, 3 and 4- are looped through the Fuel Pump Control Module -J538-.