Horn Control: Installation
To install, reverse removal procedure and note the following: Check size of steering wheel nut before tightening. Tighten a 0.47" (M 12x1.5) nut to 40-43 ft.lbs. (5.5-6.0 mkg). Tighten a 0.55" (M14x1.5) nut to 61-69 ft.lbs. (8.5-9.5 mkg).
To install, reverse removal procedure and note the following: Dimmer switch should be positioned in center of slots. When installing turn signal switch, steering must be in straight-ahead position. With switch in neutral position, cancelling finger should point to center of cancelling cam with a 0.012" (0.3 mm) clearance between cam and finger.