Repair and Diagnosis: Electrical: Starter: Starters: Description

Bosch starter is a brush-type, series-wound electric motor with an overrunning clutch. Field frame carries pole shoes and field coils, and is enclosed by commutator end frame and drive bushing. Armature shaft drive end drives a reduction gear.

Automatic start is intended to prevent driver from pressing the starter for longer than necessary. Even under cold start conditions, the driver only needs to press the start button briefly. The DME takes on the rest of the task. The DME is notified of start request via the Car Access Control Module (CACM). DME checks start conditions such as engine speed, selector lever position, EWS signal and activates start-locking relay through a separate output. The starter motor is operated by this relay. The start-locking relay is activated until engine starts. If engine does not start, start-locking relay is switched off after 20 seconds. If engine is blocked, start-locking relay is switched off after a few seconds.