86 10 ... Replacing Rear Light

Release thumb screws (1), slide light guard (2) in direction of middle of car and tilt out towards rear.

Fig 1: Sliding Light Guard

Courtesy of BMW OF NORTH AMERICA, INC.

Turn handwheel (1) counterclockwise in direction of arrow and remove base (2).

Fig 2: Turning Handwheel Counterclockwise

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and press rear light (2) out towards front.

Installation: 

Use new self-locking nuts.

Tightening Torque. Refer to TRAILERS - TIGHTENING TORQUES - ALPINA .

Fig 3: Identifying Rear Light

Courtesy of BMW OF NORTH AMERICA, INC.