lemon-mirror:
Home >> BMW >> 2009 >> 528i Standard >> Repair and Diagnosis >> General Information >> Reset Procedures >> ATEQ TPMS Reset Procedure >> ATEQ TPMS Reset Procedure

ATEQ TPMS Reset Procedure

NOTE: If a tire pressure has been adjusted, or a wheel or tire has been changed or replaced, or repairs have been made to air spring suspension, the TPMS must be reinitialized. System must be reinitialized both before and after pulling a trailer.
CAUTION: When driving with snow chains or a space-saver spare tire, DO NOT initialize the system.
  1. Set the tire pressure of all wheels to specification.
  2. Press "MENU" button.
  3. Open the "i" menu of the Control Center.
  4. Select "SETTINGS" and press the controller.
  5. Select "VEHICLE/TIRES" and press the controller.
  6. Change to upper field if necessary. Turn controller until "TPM" is selected and press the controller.
  7. Start engine, but do not start driving.
  8. Select "RESET" and press the controller.
  9. Select "YES" and press the controller.
  10. Drive vehicle. The message "RESETTING TPM...." will be displayed. Initialization is automatically completed during the drive. When initialization is complete, "STATUS: TPM ACTIVE" message will be displayed.
· About lemon-mirror