86 10... Replacing position light

Unclip cover (1) on side recess (arrow).

Fig 1: Identifying Cover On Side Recess

Courtesy of BMW OF NORTH AMERICA, INC.

Pull flat connector (1) from flat contact.

Fig 2: Identifying Flat Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out cable (1) completely.

CAUTION: Before drilling out rivet heads, drive in rivet pins with a punch.
Drill out rivet heads (2) and remove position light housing from front.

Fig 3: Identifying Rivet Heads And Cable

Courtesy of BMW OF NORTH AMERICA, INC.