Automatic Door Lock
NOTE:
Tech 2 scan tool can be used to change automatic door lock/unlock modes. Refer to scan tool manufacturer's instructions.
- Close all vehicle doors. Turn ignition switch RUN position. Apply brakes and hold firmly. Press and hold LOCK on either door lock switch and shift transaxle out of Park, then back to Park.
- To advance mode setting, shift transaxle out of Park, then back into Park. Door locks will activate in same manner they would in corresponding mode. For example, advancing to mode 4, all doors would lock, and then driver door would unlock. Advancing to mode 1, no locking or unlocking would occur. See AUTOMATIC DOOR LOCK MODES . When Mode 4 is reached, Mode 1 will be repeated.
- To exit and save current customization mode, release door lock switch. Mode 3 is the factory default mode. Disconnecting battery up to a year will not change mode setting.
AUTOMATIC DOOR LOCK MODES
| Mode | Description |
|---|---|
| 1 | No Automatic Door Lock Or Unlock |
| 2 | All Doors Lock When Shifted Out Of Park, No Automatic Door Unlock - Automatic Door Relock Active |
| 3 | All Doors Lock When Shifted Out Of Park, All Doors Unlock When Shifted Into Park - Automatic Door Relock Active |
| 4 | All Doors Lock When Shifted Out Of Park, Driver's Door Unlocks When Shifted Into Park - Automatic Door Relock Active |