Engine Controls - Service & Adjustment Specifications: Capacities

FLUID CAPACITY (CRANKCASE) ⁽¹⁾

Application

⁽²⁾ Quantity - Qts. (L)

All Models

4.5 (4.3)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Includes oil filter capacity.

CAUTION: DO NOT use cooling system seal tabs, or similar compounds, unless otherwise instructed. The use of cooling system seal tabs, or similar compounds, may restrict coolant flow through the passages of the cooling system or the engine components. Restricted coolant flow may cause engine overheating and/or damage to the cooling system or the engine components/assembly.

FLUID CAPACITY (COOLING SYSTEM) ⁽¹⁾

Application

⁽²⁾ Quantity - Qts. (L)

Except Park Avenue

10.0 (9.5)

Park Avenue

13 (12.3)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark. Use 50/50 mixture of clean, drinkable water and use only DEX-COOL(R) Coolant.

⁽²⁾	Includes heater.

FLUID CAPACITY (AUTOMATIC TRANSAXLE) ⁽¹⁾

Application

⁽²⁾ Quantity - Qts. (L)

Bottom Pan Removal

7.4 (7.0)

Complete Overhaul

10.0 (9.5)

Dry

13.4 (12.7)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Unless otherwise specified, use Dexron-III transmission fluid.

FLUID CAPACITY (POWER STEERING)

Application

⁽¹⁾ Quantity - Pts. (L)

Pump Only

1 (0.5)

Complete System

1.5 (0.7)

⁽¹⁾	Use GM Power Steering Fluid (GM P/N 1052884 or Canada P/N 993294), or equivalent.