lemon-mirror:
Home >> Buick >> 2004 >> Regal GS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls 3.8L (Introduction, Service & Replacement) >> Repair Instructions >> Accelerator Controls Cable Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine Mechanical - 3.8L.
    2. Fig 1: View Of Cruise Control Cable
    GM179339Courtesy of GENERAL MOTORS CORP.
  2. Remove the cruise control cable from the throttle body.
  3. Remove the cruise control cable (1) from the bracket (2).
    4. Fig 2: View Of Accelerator Cable At Throttle Body
    GM179346Courtesy of GENERAL MOTORS CORP.
  4. Remove the accelerator cable from the throttle body.
  5. Remove the accelerator cable (2) from the bracket (1).
    6. Fig 3: View Of Accelerator Controls Cable Bracket
    GM12246Courtesy of GENERAL MOTORS CORP.
  6. Remove the 2 bolts from the bracket.
  7. Remove the bracket from the throttle body.
· About lemon-mirror