lemon-mirror:
Home >> Buick >> 2005 >> Park Avenue Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installation Intake Air Duct
    GM55463Courtesy of GENERAL MOTORS CORP.
  1. Install the intake air duct onto the throttle body.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Rotate the intake air duct down and install the intake air duct onto the air cleaner.

    Tighten:  Tighten the air cleaner duct clamp to 2 N.m (18 lb in).

    3. Fig 2: Removing/Installation Intake Air Temperature (IAT) Sensor Electrical Connector
    GM179039Courtesy of GENERAL MOTORS CORP.
  3. Install the intake air temperature (IAT) sensor electrical connector (1) to the IAT sensor (2).
· About lemon-mirror