lemon-mirror:
Home >> Buick >> 2005 >> Park Avenue Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Repair Instructions >> Ignition Coil(s) Replacement >> Installation Procedure

Installation Procedure

  1. Attach the coil(s) (2) to the ignition control module.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    2. Fig 1: View Of Ignition Coil Module And Module Mounting Bracket
    GM12299Courtesy of GENERAL MOTORS CORP.
  2. Install the ignition coil attaching screws (1).

    Tighten:  Tighten the screws to 4.5 N.m (40 lb in).

  3. Connect the spark plug wires.
· About lemon-mirror