lemon-mirror:
Home >> Buick >> 2017 >> Envision Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install Rear Wheel Speed Sensor
    2. Fig 1: Rear Wheel Speed Sensor Electrical Connector
    GM3898440Courtesy of GENERAL MOTORS COMPANY
  2. Connect Rear Wheel Speed Sensor Electrical Connector (1)
  3. Raise and secure the rear suspension cradle. Refer to Rear Suspension Cradle Replacement
    4. Fig 2: Rear Wheel Speed Sensor Retainers
    GM3898435Courtesy of GENERAL MOTORS COMPANY
  4. Install Rear Wheel Speed Sensor Retainers (1) (Qty: 2)
    5. Fig 3: Rear Wheel Speed Sensor Retainer
    GM3898437Courtesy of GENERAL MOTORS COMPANY
  5. Install Rear Wheel Speed Sensor Retainer (1)
    6. Fig 4: Rear Wheel Speed Sensor Bolt
    GM3898439Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  6. Install Rear Wheel Speed Sensor Bolt (1) and tighten to 6 N.m (53 lb in)
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
  8. Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle
· About lemon-mirror