Fastener Specifications
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Caliper Piston Dust Boot Seal |
| Brake Caliper Piston Seal |
| Brake Hose Fitting Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bracket Bolt - Front | 160 N.m (118 lb ft) |
| Brake Caliper Bracket Bolt - Rear | 100 N.m (74 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bleeder Valve - Front | 10 N.m (89 lb in) |
| Brake Caliper Bleeder Valve - Rear | 13 N.m (115 lb in) |
| Brake Caliper Guide Pin Bolt - Front | 40 N.m (30 lb ft) |
| Brake Caliper Guide Pin Bolt - Rear | 35 N.m (26 lb ft) |
| Brake Caliper Vibration Dampener | 9 N.m (80 lb in) |
| Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |
| Brake Rotor Bolt | 9 N.m (80 lb in) |
| Brake Shield Bolt | 9 N.m (80 lb in) |